What are the things to keep in mind when doing the bag making process? One machine for paper bag machine can debug multiple standard paper bags. One machine is multi-purpose and multi-functional. However, the maintenance of the paper bag machine should be paid attention to during the process:
Maintenance rule: It is necessary to refuel all the bushings every 2 hours in the second half of the purchase of the paper bag machine. After half a month, all the bushings can be refueled once every 4 hours.
1. After each shift, it is necessary to ensure that the stolen goods on all the rollers on the grape bag machine are cleaned up. In order to make the paper bag machine process smoothly.
2. The chain is tightened once every 15 days, with appropriate tightness.
3. What should I do if the paper bag machine is not completely sealed?
In general, LDPE has a moderate anti-pollution heat sealability, EVA has excellent anti-contamination heat sealability when VA content is large, LDPE also has excellent anti-pollution heat sealability, and ionic resin and metallocene polymer Has excellent anti-pollution heat sealability.
4. All the gear tops of the paper bag machine are tightened once every 3 days to prevent loosening.
5. What should I do if the paper bag machine is brittle and brittle?
Let us first analyze the elements that make up this question: 1 may be excessive pressure; 2 heat sealing time is too long; 3 in the compounding and curing process, a part of the adhesive enters the inside of the film. 4 After the composite bag is cooled and placed, the heat seal strength is increased, and there is also a tendency to become brittle.
6. All the platen fastening screws are tightened once every 6 days to prevent loosening. The pressure plate is located at the parallel plate of the grape bag machine.
Suppose there is such a question, our solution:
1 According to the heat sealing characteristics of the data of the inner sealing layer, select the suitable processing temperature, pressure and heat sealing time;
2 Improve the surface condition of the upper heat sealing knife to make the surface of the sealer flat.
